Lechsys TINTING SYSTEM
Extremely flexible INDUSTRIAL colour mixing system, based on 30 very concentrated TINTERS and a wide series of resins (BINDERS) allowing you to obtain a wide range Enamels topcoat, 2K Topcoats, Matt and Gloss and direct to metals applications, with PRIMERS and FILLERS to meet your type of application and demand,
inclusive and not limited to:
-Trucks - Busses - Trailers - Machinery - Plants & Equipment - Bikes - Construction -
Lechsys BINDERS
BINDERS
The BINDERS are available in pre-dosed cans to enable fast production of the finished products: this will allow the
distributor/manufacturer using the colour formulations from the SW Lechler MAP® to dose into the can containing
the resin the required tinters, avoiding handling large quantities of materials and reducing to the minimum
production time as well as minimising the disposal of empty cans; at the same time the original lithographed can,
with dedicated label (printable via SW), can be delivered to the user, completed with technical instructions.
ACRITOP
29155 Binder
​
Acritop is a 2K Acrylic enamel with high appearance
finishing coat for industrial vehicles and general industry. ï‚•Excellent GLOSSand appearance, easy to apply on large surfaces, even at high room temperature, thick film application with no bubbling, excellent light and weather resistance, very high coverage.
​
CODE | SIZE |
|---|---|
Pre-dose binder
packaging means,
ADD YOUR COLOUR
&
YOU READY TO GO
LSAG3.2 3.2L
LSAG12.8 12.8L
​
2K ACRYL AC SATIN MATT
29441 Binder
​
2K Acrylic SATIN MATT topcoat, with good anticorrosive properties, and direct adhesion on steel, galvanize and alloys. Good chemical and scratch resistance,
​
​
Pre-dose binder
packaging means,
ADD YOUR COLOUR
&
YOU READY TO GO
CODE | SIZE |
|---|---|
LSADTMSM3.2 3.2L
LSADTMSM12.8 12.8L
​
2K ACRYL AC GLOSS
29446 Binder
​
2K Acrylic GLOSS topcoat, with good anticorrosive properties, and direct adhesion on steel, galvanize and alloys. Good chemical and scratch resistance,
​
​
Pre-dose binder
packaging means,
ADD YOUR COLOUR
&
YOU READY TO GO
LSADTMG 3.2 3.2L
LSADTMG 12.8 12.8L
​
CODE | SIZE |
|---|---|
ISOLACK PUR
29145 Binder
​
Two -Pack polyurethane GLOSS enamel for industrial finishes, easy application, fast drying.
​
​
Pre-dose binder
packaging means,
ADD YOUR COLOUR
&
YOU READY TO GO
CODE | SIZE |
|---|---|
LSPURIG3.2 3.2L
LSPURG12.8 12.8L
​
ISOLACK PUR MATT
29141 Binder
​
Two -Pack polyurethane MATT enamel for industrial finishes, easy application, fast drying.
​
​
Pre-dose binder
packaging means,
ADD YOUR COLOUR
&
YOU READY TO GO
CODE | SIZE |
|---|---|
LSPURIM3.2 3.2L
LSPURIM12.8 12.8L
​
SYNTOLACK
29116 Binder
​
Fast drying synthetic GLOSS enamels, suitable for truck chassis, agricultural and industrial machinery, motor and workshop equipment
​
​
Pre-dose binder
packaging means,
ADD YOUR COLOUR
&
YOU READY TO GO
CODE | SIZE |
|---|---|
LSESG3.16 3.2L
LSESG12.8 12.8L
​
SYNTOLACK MATT
29112 Binder
​
Fast drying synthetic MATT enamels, suitable for truck chassis, agricultural and industrial machinery, motor and workshop equipment
​
​
Pre-dose binder
packaging means,
ADD YOUR COLOUR
&
YOU READY TO GO
CODE | SIZE |
|---|---|
LSESM3.16 3.2L
​
PRIMERS
EPOPRIMER 1K
29108
​
One pack anti corrosive epoxy-ester primer. Chromate and lead free,
Suitable as a direct adhesion in metal industry and truck refinish. Fast drying.
Suitable for metal, zinc coated, aluminum and alloy.
​
CODE | SIZE |
|---|---|
LS1KEP3.4 3.4L
LS1KEP13.6 13.6L
EPOXY PRIMER
29107
​
Two pack epoxy primer - sealer/filler with excellent anticorrosive power and zinc-phosphate.
Suitable as a direct adhesion to metal, zinc coated, aluminum and alloy.
High filling, good sanding and can be used as wet on wet, refer to TDS.
​
​
CODE | SIZE |
|---|---|
LS2KEP3.4 3.4L
LS2KEP13.6 13.6L
Hardeners
EPOXY HARDENER STANDARD
​
Refer to TDS for use with two pack epoxy primer.
CODE | SIZE |
|---|---|
LSEPSH4 4 L
LSEPSH1 1 L
ACRITOP HARDENER STANDARD
​
Refer to TDS for use with Acritop 2K acrylic top coats
CODE | SIZE |
|---|---|
LSHAS4 4 L
LSHAS1 1 L
ISOLACK HARDENER
​
Refer to TDS for use with Isolack Poly urethane
CODE | SIZE |
|---|---|
LSHIS4 4 L
LSHIS1 1 L
COLOUR TOOLS & EQUIPMENT
